For fall protection uses
* Anchor point approved for 3 users
* Approved for rope access : CQP DPMC, SPRAT and IRATA
* Complies with standard EN 795 with guaranteed strength greater than 1400 kg (daN) [ 1200 + 100 + 100 ]
* ATTENTION: Please don't tighten the screws harder than 40 Nm, otherwise the aluminium would break.
For acrobatic rigging and lifting uses
Although these reinforced plates were not originally designed for lifting or acrobatic rigging needs,
their excellent strength and their very high level of traceability and compliance (EN 795) allow them to be used for functions which respect their mechanical capacities.
With a breaking load limit greater than 2800 kg (daN) in all directions, and based on the regulatory lifting coefficients (machinery directive 2006-42 chap. 4),
their use at a SWL of 700 kg (daN) is validated in all directions.
As a result, these reinforced plates are highly valued for occasional lifting needs in industry,
as well as for the rigging of circus apparatus, pulley systems and guy lines in circus schools and in acrobatic practice facilities.
Specifications
* 100% aluminum system to guarantee a better lifespan
* Aesthetic and discreet design that respects the contact with the connectors
* Guaranteed for 10 years against any manufacturing defect
* EN 795 fall protection anchor point approved for 3 persons
* Anchor point approved for rope access
* Compatible with the most common boltings on the market:
- M12 or 1/2" studs (in concrete)
- M12 or 1/2" chemical anchor rods (in concrete)
- M12 or 1/2" bolts (in metal brackets)
- 12 mm or 1/2" lag screws (in wood)
* Length: 140 mm
* Width: 72 mm
* Total height: 59 mm
* Height lost at anchor: 42 mm
* Center distance between the fixings: 100 mm
* Diameter of fixing holes: 14 mm
* Recommended size for fixings: M12 or 1/2''
* Connection hole diameter: 26mm
* Color: Raw aluminum
* WLL: 700daN (kg)
* MBS:> 2800 daN (kg)
* Standard: EN 795-A1 2012 both in static and dynamic
General Safety Instructions
The safety and proper operation of the device are of utmost importance. Please adhere to the following guidelines:
- Follow Manufacturer Guidelines:
Ensure that you carefully read and follow the manufacturer's safety and usage instructions for the device. These include specific guidance for safe use and maintenance.
- Regular Inspection:
Inspect the device regularly according to the intervals and procedures recommended by the manufacturer. Look for signs of wear, damage, or other issues that may compromise safety.
- Component Replacement:
Replace the device or any affected components if visible damage is present or if the manufacturer's specified maximum usage duration has been reached.
- Adherence to Working Load:
The assumed user load must never exceed the working load specified by the manufacturer for the device. Exceeding this limit may result in severe damage or accidents.
- Responsible Use:
The installation and use of the device should only be performed by qualified personnel or under expert supervision. Unauthorized or improper use should be avoided.
- Liability Disclaimer:
The operator assumes full responsibility for the proper installation, maintenance, and use of the device. The manufacturer or seller accepts no liability for damages resulting from non-compliance with safety guidelines or improper use.
.png "Preview: Single-Trapeze")
_73_7.png "Preview: Single-Trapeze - Vegan")
.png "Preview: Professional Single-Trapeze")
.png "Preview: Duo-Trapeze")
.png "Preview: Duo-Trapeze")
