This black powder-coated steel aerial hoop is available in four sizes and is supplied without welded rigging points. A suitable rigging system can therefore be selected separately for the intended application.
At a glance:
Black powder-coated steel tubing with a diameter of 27 mm, hoop sizes from 90 to 105 cm and a selectable tape configuration.
Product features
- Black powder-coated steel tubing
- Tube diameter: 27 mm
- Hoop sizes: 90, 95, 100 or 105 cm
- No welded rigging points
- Available without tape or with black or white tape
- Rigging and connectors must be selected separately
- Manufacturer: FR SPORT GROUP Sp. z o.o.
Documented load data
| Tested breaking load | 1,700 kg |
|---|
| Maximum user weight | 120 kg |
|---|
The load data apply to the hoop itself. The rigging system, anchor point and all connectors must still be suitable for the expected static and dynamic loads.
Choosing a size
Select the hoop size to suit the intended application and the user's body measurements. We will be happy to assist if you are unsure which size to choose.
Scope of delivery
- 1 aerial hoop in the selected size and tape configuration
- Instructions including breaking-load documentation
Safety and rigging
Important: The hoop is supplied without welded rigging points. The rigging method, position and installation must be assessed by a competent person for the intended application.
- Inspect the hoop, welds, tape, rigging and connectors before every use
- Immediately remove from service if damage, deformation, corrosion or an unclear history is identified
- Always use a suitable crash mat or aerial-arts landing mat
- Learn new skills only under competent instruction
- Children must train under the direct supervision of an adult
- Observe the inspection and replacement requirements specified by the relevant manufacturer
Product images may show different sizes and tape configurations. The options selected in the shop determine the supplied product.
The safety and proper operation of the device are of utmost importance. Please adhere to the following guidelines:
- Follow Manufacturer Guidelines:
Ensure that you carefully read and follow the manufacturer's safety and usage instructions for the device. These include specific guidance for safe use and maintenance.
- Regular Inspection:
Inspect the device regularly according to the intervals and procedures recommended by the manufacturer. Look for signs of wear, damage, or other issues that may compromise safety.
- Component Replacement:
Replace the device or any affected components if visible damage is present or if the manufacturer's specified maximum usage duration has been reached.
- Adherence to Working Load:
The assumed user load must never exceed the working load specified by the manufacturer for the device. Exceeding this limit may result in severe damage or accidents.
- Responsible Use:
The installation and use of the device should only be performed by qualified personnel or under expert supervision. Unauthorized or improper use should be avoided.
- Liability Disclaimer:
The operator assumes full responsibility for the proper installation, maintenance, and use of the device. The manufacturer or seller accepts no liability for damages resulting from non-compliance with safety guidelines or improper use.
.png "Preview: Duo-Trapeze")
.png "Preview: Duo-Trapeze")